2009/2/20 notes: 1. all dimensions are in millimeters (inches); 2. tolerances are 0.1mm (0.004inch) unless otherwise noted. 3. polarity referring onto the cathode mark is reversed on the red. a a a - - - b b b r r r i i i g g g h h h t t t a-bright industrial co., ltd. surface mount chip led lamps tft display led part number: 99-213uwc package outlines & re-flow profile ? soldering iron basic spec is u 5sec when 260 . if temperature is higher, time should be shorter (+10 ? -1sec ).power dissipation of iron should be smaller than 15w, and temperatures should be controllable .surface temperature of the device should be under 230 . ? reflow temp/time item materials resin (mold) epoxy lens color yellow diffused printed circuit board bt emitted color white material ingan
2009/2/20 a a a - - - b b b r r r i i i g g g h h h t t t a-bright industrial co., ltd. surface mount chip led lamps part number: 99-213uwc electro-optical characteristics (t a =25 ) value parameter test condition symbol min. typ. max. unit viewing angle at 50% i v i f =10ma 2 1/2 110 deg forward voltage i f =20ma v f --- 3.2 3.6 v luminous intensity i f =20ma i v --- 1000 --- mcd x --- 0.31 --- chromaticity i f =20ma y --- 0.32 --- --- peak pulsing current (1/10 duty f=1khz) i fp 60 ma absolute maximum ratings (sdr) (t a =25 ) parameter symbol value unit forward current i f 30 ma reverse voltage v r 5 v reverse current i r 50 a electrostatic discharge esd 150 v power dissipation p d 120 mw operating temperature range top -30 ~+85 storage temperature range tstg -40 ~+100
2009/2/20 no item test conditions test hours/cycle sample q?ty ac/re 1 solder heat temp 260 5 5 sec 30 pcs 0/1 -40 30 min -25 5 min -105 30 min 2 temperature cycle -25 5 min 100 cycles 30 pcs 0/1 -40 5min 3 thermal shock -105 5min 20 cycles 30 pcs 0/1 4 high temperature storage temp 85 1000 hrs 30 pcs 0/1 5 low temperature storage temp -35 1000 hrs 30 pcs 0/1 6 dc operating life i f =350ma 1000 hrs 30 pcs 0/1 7 high temperature high humidity ta=60 r.h 90% 1000 hrs 30 pcs 0/1 refer to reliability test standard specification for in this line. a a a - - - b b b r r r i i i g g g h h h t t t a-bright industrial co., ltd. surface mount chip led lamps part number: 99-213uwc test items and results of reliability
2009/2/20 a a a - - - b b b r r r i i i g g g h h h t t t a-bright industrial co., ltd. surface mount chip led lamps part number: 99-213uwc color ranks
2009/2/20 a a a - - - b b b r r r i i i g g g h h h t t t a-bright industrial co., ltd. surface mount chip led lamps part number: 99-213uwc typical electro-optical characteristic curves
2009/2/20 a a a - - - b b b r r r i i i g g g h h h t t t a-bright industrial co., ltd. surface mount chip led lamps part number: 99-213uwc typical electro-optical characteristic curves
|